Perfect Aire PAU13 - Manual (Page 7)

IMPORTANT NOTES REGARDING HUMIDIFIER USAGE
1. It is recommended that the humidifier base be cleaned before first use. See cleaning
instructions on next page.
2. Be sure unit is at least 24 inches off of the floor. Place unit on a firm, level surface. Do not
place unit on overly soft, unstable surface, towel or wood. The humidifier should be placed at
least four (4) inches away from all walls and away from heat sources.
3. When filling the tank, note:
a. Always unplug unit before filling and replacing tank.
b. Distilled or softened water is highly advised. Minerals in (hard) tap water may cause a
“white dust” to appear on furniture and also can eventually cause unit failure.
c. Extreme temperatures can damage unit. Water temperatures should NEVER be too hot
or too cold. Water temperature should fall between 40°F and 90°F.
d. Return tank securely to base before turning on humidifier.
4. To Turn Unit On
a. Plug power cord into a 110-120V AC wall outlet only.
b. Turn the On/Off Adjustment Knob in a clockwise direction to begin operation of unit.
c. Press night light button to illuminate water tank for night time operation.
d. Turn mist output control nozzle to manually adjust mist direction.
5. To Turn Unit Off
a. Turn unit off when desired room humidity is achieved by turning the On/Off Adjustment
Knob counter-clockwise.
b. Always turn unit off when water tank is empty.
c. Unit will automatically stop creating mist when water level in base is very low.
d. Do not let water sit in water bottle tank or base for more than 24 hours.
e. Unplug when not in use.
DANGER!
Improper use of electric cords and plugs can cause a fire or electric shock hazard. NEVER pull on
the cord to remove the plug from the outlet. Grip plug and pull from outlet. Check the power cord
and plug for damage. A damaged cord or plug must be repaired before using the humidifier.
6
OPERATING INSTRUCTIONS
HOW TO USE YOUR HUMIDIFIER
WEEKLY MAINTENANCE CLEANING & CARE
For optimum performance, clean your humidifier weekly according to the following instructions.
IMPORTANT:
• Unplug the power cord before cleaning.
• NEVER use any cleaning products/solutions which are abrasive, corrosive or flammable, as
these can be harmful to the unit and void warranty if used.
STEP ONE: Scale Removal
1. Fill the base with one 8-oz cup of undiluted white vinegar.
2. Let solution stand for 20 minutes.
3. With the vinegar in the base, clean all interior surfaces with a soft cloth or brush to help
remove scales. Do not touch the nebulizer with fingers. Any residue on the nebulizer will
reduce mist output.
4. Carefully rinse with clean, warm water and gently wipe clean.
Continued on Next Page >