phil&teds vibe 2 - Manual (Page 16)

Unfolding
without double kit attached,
or with the double kit on front of the buggy in
toddler/newborn position.
a Open both of the black hinge locks.
(The black paddle things on each side
of the frame).
b Unfold the frame (the red safety latch
will auto engage when the buggy is
fully unfolded).
Note Sometimes the frame will lock and
needs to be pushed together to release.
c Close both of the black hinge locks.
(Those paddle things on either
side of the frame).
d Push the main seat base
(fabric seat) down and GO GO GO..!
Unfolding
with the double kit in
rear position.
e Repeat unfolding instructions a-c .
f Pull double kit out.
WARNING
:
THIS IS IMPORTANT
g Be sure to re-engage
the double kit
nib springs.
h Push the main seat base
(fabric seat) down and GO GO GO..!
done!