phil&teds pepe v1 - Manual (Page 5)

nitty gritty
a
This brings the child closer to you
- firm but not tight.
9.
Once you're confident that all straps
are secure and fit well, you can let
your child sit.
10.
Turn your child's head to the side.
11. As your child grows you can slide adjust
the head support, fold it over, or remove it.
Keep it in the storage bag. Do not store wet.
12. Adjust all straps as your child grows.
Only face your child out once s/he can
support his/her head (usually when she/he
can sit unsupported by her/himself).
a
b
pe pe and your baby
IMPORTANT - Before loading your child for
the first time familiarise yourself with all the
buckles and adjustment straps.
1.
Put pe pe on and check the fit, as above.
2. Loosen the side strap.
3.
Do up the infant snaps.
Release ONLY if you're comfortable
that your child is large enough
(usually >8lb/4kg and 55cm)
4.
Undo the top buckles 'a' .
5. Sit down with your baby.
6.
Hold your child on pe pe, against your
chest, and do up all the buckles (2 top
and 2 leg
'b' ) and the 2 snaps 'c' for a
closer fit for smaller babies.
7.
Make sure one of your child's legs are
each side of pe pe. Check out the photo.
Do not put both legs out one side.
8.
Put your child's arms under the top
straps and over the leg straps. Adjust all
straps for a close fit. Tighten top straps
and leg straps to secure your child.
c