phil&teds alpha - Manual (Page 16)

Instructions
ADJUSTING THE HARNESS
3a Adjust the shoulder straps height so they are
level with, or just below child shoulders.
3b To adjust the height of shoulder straps, you need to
take out the straps from the splitter plate located in
the rear of the seat.
3d Pull both straps through the shell and seat cover.
3e Thread the harness straps through the proper
harness slot. Make sure that both straps are even
and not twisted. From the rear of the seat, secure
the harness strap onto the splitter plate (3b). Pull to
make sure the harness straps are firmly secured
onto the splitter plate. Remember, shoulder
straps should be level with, or just below the child’s
shoulders (3a).
3a
3b
3c
3d
3e