PiPO Pad-P1 User Manual
Page 36
３６
9.4 Instructions of Installing Rock chip USB driver
If you do the upgrading for the first time, please install the Rock chip
USB driver in accordant with the bellowing instructions.
If you are upgrading via your PC for the first time, it requires your PC
to install Rock chip USB driver, after your tablet entering into
upgrading mode, it will pop out a guide advising you that the PC finds
new hardware. Select manually install and then click “next”
Select the USB driver in accordant with your PC system, the driver is
included in the “RK batch tool”. Then the PC will install the USB driver
automatically. After finishing USB installing, go back to upgrading
mode.
Note
If your PC is with Win7 or Vista system, it will not pop out the guide
leading you to install the driver, you get to install the driver in “My
Computer”.
1. Right click “My Computer”, select “Device Manager”
2. There will be an “Unknown Device” with an exclamation mark
appears
3. Right click the “Unknown Device”, select “renew driver software”