PiPO Ultra-U8 User Manual
Page 25
Advertising
２５
When hotspot is set up , there will be an icon appearing, like this, the
Wi-Fi signal is surrounded by a white square:
Ethernet: Turn on Ethernet, connect to HOST port via the OTG cable
which is included in accessories, and then connect this OTG cable to
the Ethernet cable.
Mobile networks: Turn on ―Mobile Networks‖→ ―Data enabled‖
whether you use a 3G dongle or SIM card, it‘s required to turn on
―Data enabled‖ for mobile data transmission .
Advertising