PRG Vx76 Basic Profile Editor User Manual v1.1 - Manual (Page 9)

VX76 BASIC PROFILE EDITOR USER MANUAL 7
Advanced
35 In the case where a fixture's assigned footprint is greater than the parameters defined (e.g., blank channels at the
end, timing channels, etc.) one can override the automatic channel count to make it larger. This is not
recommended unless it is absolutely necessary.
Note: You can only specify a channel number GREATER than the highest DMX address assigned in the Parameter
list.
Mod Date
36 The Date/Time stamp of the profile being edited. This is used to differentiate between older and newer versions of
profiles with the same name for profile upgrading purposes.