Curtis TID991 - Manual (Page 3)

DESCRIPTION OF DISPLAYING
A. 3 line LCD displaying, upper line displays the basic information, middle
line displays the number of in-coming call and bottom line displays the
name of caller
• "NEW" appears when there are new incoming calls
• "CALL #" means the total amount of incoming calls
• "RPT#" means the total amount of repeated incoming calls
• "XX:XX AM/PM XX/XX" means Hour:Minute Morning/Afternoon
Month/Day respectively
• "MGS" means Message
B. If a number was received more than once, the LCD will only display
the time and date of the last call when review the incoming calls.
C. If the time and date of incoming call is different from the Telephone
Company, the telephone will adjust the time and date automatically
according to Telecom Provider when receiving calls.
D. If there is no operation or no incoming calls more than 30 seconds,
LCD only displays time and date, total amount of received calls and
amount of new incoming calls
E. Ringer LED will light when there is a new call coming in until any
functional keys be pressed.
F. This telephone can store up to 99 incoming calls. If there is a new call
after the 99th call, the oldest one will be erased automatically and the
new call will be stored.
CALLER ID STATUS INDICATIONS
'UNAVAILABLE'
The call is made through a telephone company which does not offer Caller
ID service.
'PRIVATE'
The call was blocked. For privacy reason, many states allow callers the
option to prevent his or her telephone data from being displayed on the
other part's Caller ID display. If you receive a call which was blocked in
this way, "PRIVATE" will be shown on the display.
'LINE ERROR'
An error data was received. When ERROR is shown on the display, the
telephone number may include some error digits.
OPERATION INSTRUCTION
Viewing the caller ID list
This unit can store up to 99 calls received
Press [
▲ ] and [ ▼ ], the display shows the previous (older) data of call. When
the oldest data is viewed. "END OF RCV" will appear on the display. If the
received number contains your own area code, the area code will not appear
on the screen.
Erasing data from the caller ID list
This unit maintains the data of last 99 calls in memory. If there is a new
call after those 99 calls, the oldest data will be automatically erased and
the new call will be stored.