Pro Boat PRB2700 - Manual (Page 6)

6
Section 3: Installation of Receiver and Transmitter Batteries
Receiver Batteries
 1. Remove the knurled aluminum nut that
secures the cockpit. Pull the cockpit off the boat.
 2. Remove the clear lid that covers the
radio box.
 3. Remove the dry cell battery holder from the
radio box and unwrap the foam from around the
dry cell battery holder. Install 4 “AA” alkaline
batteries as shown. Note the proper polarity.
Wrap the battery box in foam.
 4. Re-install the battery holder into the radio
box and properly seal the radio box with
clear tape. Failure to properly seal the radio
box could result in damage to your radio
equipment. Insert the receiver antenna tube
into the clear lid.