Proheat T-I - Manual (Page 9)

To Set Timer (single timer mode)
STEP 1 Press & Hold “Timer”.
(Green light will go on & “T1” will flash.)
STEP 2 Press “ ” or “ ” to set “ON” time.
STEP 3 Press “Day” to set day.
STEP 4 Release “Timer”. (Green light and “T1”
will remain lit to indicate active Timer.)
Timer set in the single timer mode only
will allow you to set one “ON” time.
With the T1 time activated, the Timer will
go “ON” at the preset time, and will be
de-activated at the end of it’s duration time.
To re-activate the Timer press “Timer”.
NOTE: When set time is reached, heater
switches on. Red and green lights are on.
1 or 3 hour duration option is set using
Dip switch No.2 on back of Timer.
ON = 3 hour duration
OFF = 1 hour duration
(factor y preset: 3 hour duration)
7