PS Engineering PMA8000BT - Manual (Page 8)

Page 8 202-890-0702 PMA8000BT Pilot Guide Rev. 4
its presence and attempt to pair. Pairing will only occur when
both devices agree, so you will have to accept the pairing on your
device.
Connection — this occurs when Bluetooth devices that have
been previously paired see each other again and reestablish their
communication. This can happen automatically, or by prompting
the user to accept the connection again. The PMA8000BT will
always look for paired devices when it is turned on, and connect
with the first one that allows connection.
2.What access code do I use?
a. If your phone requires an access code to complete the pairing,
you can use 0000 (all zeros). See the table if you wish to
change the audio panels access code to “1234,” or “1111”.
3. How many devices can I pair with the audio panel?
a. You can pair up to eight devices. After that, the audio panel
will “forget” one device when another is added. Due to the
nature of the internal Bluetooth file structure, we can’t predict
which device will be dropped. If your desired device is
dropped, simply re-pair the one you want.
4. What is the difference between the SimpleBlue™ and Super-
Blue™?
a. SimpleBlue™ is the most basic functionality. The
PMA8000BT can be paired and connected to one device, like a
Smartphone, for telephone and music streaming. This is the
default mode as shipped by PS Engineering, and is best if the
airplane has a single user, or one user at a time (a shared air-
Hold button on power up Pairing Code
Nav 1 0000 (default)
Nav 2 1234
MKR 1111
Mode Hold buttons at power-on
SimpleBlue Nav 1 and Nav 2
SuperBlue Nav 1 & MKR