PS Engineering PMA7000CD Installation Manual - Manual (Page 30)

PS Engineering
PMA7000CD Audio Selector Panel and Intercom System
With PCD7100-R Remote Compact Disc Player
Installation and Operator’s Manual
200-790-0010 Appendix A Revision 10, September 2005
Appendix A – MP3 Creation
5.1 Creating MP3s from an Audio CD
1. Start MusicMatch JukeBox.( www.musicmatch.com ) Press the recorder but-
ton, which is the small red dot located in the top right corner. This will open
the recorder window located at the bottom of the screen.
2. Insert an audio CD into the CD drive. MusicMatch will automatically read the
disc and display the contents in the recorder window. Press the REFRESH
button to check the Internet database for CD information, such as artist, song
title, or album. If this information is available, it will automatically be updated
in the file.
3. Select Options->Recorder->Format and select either MP3 or MP3PRO for-
mat. You may also set the MP3 file quality under the Options->Recorder-
>Quality menu.
4. Select the tracks to be copied to MusicMatch by checking the box next to the
desired track. Press the record button in the lower left corner when complete
5. MusicMatch will then convert the files from the audio CD to MP3 and display
them in the Music Library box located in the middle of the screen
6. To edit the MP3 information, select a file in the Music Library and press the
TAG button in the top right corner of the Music Library box. This will display
the MP3 tagged information screen.
7.
For best results (reduced skipping, etc.) burn rate of the disc should not
exceed the published rate of the media, or 2X, whichever is lower.