Jacking and tire changing, Jack location, Spare tire removal – Ram Trucks 2013 С/V - User Guide User Manual

Page 98: To access spare tire winch drive nut, What to do in emergencies

Advertising
background image

JACKING AND TIRE CHANGING

Jack Location

• The jack, jack handle and winch

handle tools are stowed behind the
rear left side trim panel in the rear
cargo area. Turn the two cover latches
to release the cover.

• Remove the pouch containing the

scissors jack, jack handle, and tools.

Spare Tire Removal

• The spare tire is stowed inside a pro-

tective cover located under the center
of the vehicle between the front doors
by means of a cable winch mecha-
nism. The “spare tire drive” nut is
located on the floor, under a plastic
cap at the front of the floor console or
under front super console forward bin liner.

To Access Spare Tire Winch Drive Nut

• To access the spare tire winch drive nut and lower the spare tire, you will need to

refer to one of the following center console configurations.

Super Console

• For vehicles equipped with the Super Console, the spare tire winch assembly drive

nut is located beneath the console.

1. Pull the lower drawer out from the rear of the floor console.

WHAT TO DO IN EMERGENCIES

96

Advertising