Ram Trucks 2014 Chassis Cab Commercial - Diesel Supplement User Manual
Page 326
Component
Fluid, Lubricant, or Genuine Part
Engine Oil
In ambient temperatures above 0°F (-18°C), we recommend you use 15W-40 engine oil such
as MOPAR®, Shell Rotella® and Shell Rimula® that meets Chrysler Materials Standard
MS-10902 and the API CJ-4 engine oil category is required. Products meeting Cummins®
CES 20081 may also be used. The identification of these engine oils is typically located on
the back of the oil container.
In ambient temperatures below 0°F (-18°C), we recommend you use 5W-40 synthetic
engine oil such as MOPAR®, Shell Rotella® and Shell Rimula® that meets Chrysler
Materials Standard MS-10902 and the API CJ-4 engine oil category is required.
Engine Oil Filter
We recommend you use MOPAR® Engine Oil Filters.
Fuel Filters
We recommend you use MOPAR® Fuel Filter. Must meet 3 micron rating. Using a fuel
filter that does not meet the manufacturers filtration and water separating requirements
can severely impact fuel system life and reliability.
Crankcase Ventilation
Filter
We recommend you use MOPAR® CCV Filter.
324 MAINTAINING YOUR VEHICLE