Ram Trucks 2014 Cargo Van Commercial - Owner Manual User Manual

Page 164

Advertising
background image

WARNING!

Any voice commanded system should be used only
in safe driving conditions following all applicable
laws, including laws regarding phone use. Your at-
tention should be focused on safely operating the
vehicle. Failure to do so may result in a collision
causing serious injury or death.

When you press the Voice Command

button, you

will hear a beep. The beep is your signal to give a
command.

NOTE:

If you do not say a command within a few

seconds, the system will present you with a list of
options.

If you would like to interrupt the system while it lists
options, press the Voice Command

button, listen

for the beep, and say your command.

Pressing the Voice Command

button while the

system is speaking is known as “barging in.” The
system will be interrupted, and after the beep, you can
add or change commands. This will become helpful
once you start to learn the options.

NOTE:

At any time, you can say the words “Cancel,”

“Help” or “Main Menu.”

These commands are universal and can be used from any
menu. All other commands can be used depending upon
the active application.

When using this system, you should speak clearly and at
a normal speaking volume.

The system will best recognize your speech if the win-
dows are closed, and the heater/air conditioning fan is
set to low.

At any point, if the system does not recognize one of your
commands, you will be prompted to repeat it.

162

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Advertising