Shifting into neutral (n) – Ram Trucks 2014 Chassis Cab Commercial - Owner Manual User Manual

Page 408

Advertising
background image

CAUTION! (Continued)

Do not disconnect the rear drive shaft because fluid

will leak from the transfer case, causing damage to
internal parts.

Do not use a bumper-mounted clamp-on tow bar

on your vehicle. The bumper face bar will be
damaged.

Shifting Into NEUTRAL (N)

Use the following procedure to prepare your vehicle for
recreational towing.

WARNING!

You or others could be injured or killed if you leave
the vehicle unattended with the transfer case in the
NEUTRAL (N) position without first fully engaging

(Continued)

WARNING! (Continued)

the parking brake. The transfer case NEUTRAL (N)
position disengages both the front and rear drive-
shafts from the powertrain and will allow the vehicle
to move, even if the transmission is in PARK. The
parking brake should always be applied when the
driver is not in the vehicle.

CAUTION!

It is necessary to follow these steps to be certain that the
transfer case is fully in NEUTRAL (N) before recre-
ational towing to prevent damage to internal parts.

1. Bring the vehicle to a complete stop, with the engine

running. Firmly apply the parking brake.

2. Shift the transmission to NEUTRAL.

3. Press and hold the brake pedal.

406

STARTING AND OPERATING

Advertising