Ram Trucks 2014 Chassis Cab Commercial - User Guide - Manual (Page 32)

TILT STEERING COLUMN
The tilt lever is located on the steering column below the turn signal lever.
• To tilt the column, simply pull the tilt
lever rearward toward you and then
move the steering wheel upward or
downward as desired.
• Release the tilt lever to lock the steer-
ing wheel into position.
ADJUSTABLE PEDALS
• Press the switch located on the left side of the steering column forward to move
the brake and accelerator pedals away from the driver and press the switch
rearward to move the pedals closer to the driver.
NOTE:
The pedals cannot be adjusted when the vehicle is in REVERSE or when the
Electronic Speed Control is set.
CAUTION!
Do not place any article under the adjustable pedals or impede its ability to move,
as it may cause damage to the pedal controls. Pedal travel may become limited if
movement is stopped by an obstruction in the adjustable pedal's path.
WARNING!
• Tilting the steering column while the vehicle is moving is dangerous. Without a
stable steering column, you could lose control of the vehicle and have a
collision. Adjust the column only while the vehicle is stopped. Be sure it is
locked before driving.
• Do not adjust the pedals while the vehicle is moving. You could lose control and
have a collision. Always adjust the pedals while the vehicle is parked.
GETTING STARTED
30