Ram Trucks 2014 ProMaster Commercial - Owner Manual - Manual (Page 154)

ROTARY knob clockwise. To decrease the bass level, turn
the ROTARY knob counterclockwise. The bass levels can
be set between -15 and 15.
Treble
The display will show
ЉTREB 00Љ to indicate that the
Treble function can be set. To increase the treble level,
turn the ROTARY knob clockwise. To decrease the treble
level, turn the ROTARY knob counterclockwise. The
treble levels can be set between -15 and 15.
Balance
The display will show the message ЉBAL 00Љ to indicate
that the balance function can be set. Turn the ROTARY
knob clockwise to transfer the sound to the right-hand
side; the display will show
ЉBAL R 01Љ. Turn the ROTARY
knob counterclockwise to transfer the sound to the
left-hand side; the display will show
ЉBAL L 01Љ. The
balance levels can be set between 0 and 15.
Fader
The display will show ЉFAD 00Љ to indicate that you can
set the Fader function. Turn the ROTARY knob clockwise
to transfer the sound to the front; the display will show
ЉFAD F 01Љ. Turn the ROTARY knob counterclockwise to
transfer the sound to the back; the display will show
ЉFAD R 01Љ. The fader levels are set from 0 to 15.
Loudness
The display will show ЉLOUD 00Љ to indicate that you can
set the loudness (enhanced sound) function. Turn the
ROTARY knob clockwise to enable the loudness function
at level 1; the display will show
ЉLOUD 01Љ and the
LOUD flag will be enabled. The radio supports three
loudness levels.
Volume
Turn the ROTARY knob clockwise to increase the vol-
ume. Turning it counterclockwise will lower the volume.
The volume can be set between 0 and 30.
152 UNDERSTANDING YOUR INSTRUMENT PANEL