RED DSMC POWER - Manual (Page 54)

COPYRIGHT © 2014 RED.COM, INC
RED DSMC POWER OPERATION GUIDE
955-0038, REV-F | 54
+1 ADAPTOR MODULE
SPECIFICATION DESCRIPTION
Dimensions Height: 4.29 in. (109 mm)
Width: 3.54 in. (90 mm)
Depth: 0.87 in. (22 mm)
Weight Approximately 0.75 lbs (349 g)
Construction Aluminum Alloy
Operating Temperature 0°C to 40°C (32 to 104°F)
Storage Temperature –30°C to 70°C (–22°F to 158°F)
Connectors RED EVF/LCD
PWR (4-pin 0B LEMO), 2.0 Amp continuous load at 11.5-17 VDC
Firmware Requirement DSMC firmware v4.0.8 or later
WARNING: DO NOT use the EVF/LCD port on the +1 Adaptor Module if a Pro I/O Module is connected to the
DSMC BRAIN.
PRO BATTERY MODULE (DUAL)
SPECIFICATION DESCRIPTION
Dimensions Height: 4.29 in. (109 mm)
Width: 3.86 in. (98 mm)
Depth: 2.65 in. (67 mm)
Weight Approximately 1.21 lbs (549 g), Module only
Construction Aluminum Alloy
Operating Temperature 0°C to 40°C (32°F to 104°F)
Storage Temperature –30°C to 70°C (–22°F to 158°F)
PRO BATTERY MODULE (QUAD)
SPECIFICATION DESCRIPTION
Dimensions Height: 4.29 in. (109 mm)
Width: 3.86 in. (98 mm)
Depth: 4.35 in. (111 mm)
Weight Approximately 1.65 lbs (748 g), Module only
Construction Aluminum Alloy
Operating Temperature 0°C to 40°C (32°F to 104°F)
Storage Temperature –30°C to 70°C (–22°F to 158°F)