Undock the redlink bridge, Power the redlink bridge, Redlink bridge operation guide – RED REDLINK™ BRIDGE User Manual
Page 12
Advertising
COPYRIGHT © 2014 RED.COM, INC
REDLINK BRIDGE OPERATION GUIDE
955-0064, REV-B | 12
UNDOCK THE REDLINK BRIDgE
1. Press the release buttons on both sides of the REDLINK Bridge, and slide the module upward.
2. Remove the REDLINK Bridge.
POWER THE REDLINK BRIDgE
The camera automatically powers the REDLINK Bridge when the REDLINK Bridge is connected to the camera
and the camera is powered.
Advertising