RED 3-AXIS LENS CONTROL SYSTEM - Manual (Page 30)

COPYRIGHT © 2014 RED.COM, INC
RED 3-AXIS SYSTEM OPERATION GUIDE
955-0044, REV-D | 30
SAVE A LENS PROFILE
If you have made lens profile modifications but did not save changes at the time, follow these steps to save
your changes.
1. In the W.M.D. main menu, select Profiles.
2. Select Save.
VIEW LENS METADATA
Metadata format is dependent on your lens profile setting:

Lens profile is selected (Select > Profiles): Focus, Iris, and Zoom data extrapolated from the motor encoder
positions displays for each lens function (Focus, Iris, Zoom).

Lens profile NOT selected: Hexadecimal motor position data displays for each lens function (Focus, Iris,
Zoom).
Once a lens profile is selected, you can view lens metadata on the W.M.D. screen.
1. In the W.M.D. main menu, select Metadata.
NOTE: If a lens does not support a particular lens function (Example: prime lenses do not have zoom) or a motor
is not connected, the resulting value is displayed as a hexadecimal value.
EXPORT LENS PROFILES
Use the export function to save modified profiles to the microSD card for repeat use and sharing.
1. In the W.M.D. main menu, select Profiles > Save.
2. Select Export.
3. Choose one of the following options:
‒ Overwrite: Exports all profiles, overwriting any differences on the microSD. Saves existing profiles.
‒ Keep: Adds W.M.D. profile library to existing microSD contents.
‒ Only: Clears the microSD and replaces contents with the existing W.M.D. profile library.
The W.M.D. displays “success” when the export is complete.
4. Press Back to exit, or press A to lock the W.M.D. and return to the home screen.
5. Remove the microSD card.
IMPORT LENS PROFILES
Use the import function to load modified profiles onto the W.M.D. from the microSD card.
1. Ensure that the desired profile “.pfl” files are loaded on the microSD card.
2. Insert the microSD card into the W.M.D.
3. In the W.M.D. main menu, select Profiles > Import.
4. Choose one of the following options:
‒ Overwrite: Imports all profiles, overwriting any differences on the W.M.D. Saves existing profiles.
‒ Keep: Adds microSD contents to existing W.M.D. profile library.
‒ Only: Clears the W.M.D. and rebuilds profile library with microSD contents.
The W.M.D. displays “success” when the import is complete.
5. Press Back to exit, or press A to lock the W.M.D. and return to the home screen.