RED MATTE BOX CAGE & SIDE FLAGS - Manual (Page 4)

AUGUST 18, 2011
© 2011 RED.COM INC.
3
MATTE BOX CAGE AND SIDE FLAGS KIT COMPONENTS
The RED Matte Box Cage and Side Flags Kit include the following:
• 1 – Assembled Matte box Cage
• 4 – M2 x 8mm Flat Screws
• 6 – M3 x 6mm Flat Screws
• 1 – T-6 Torx® Driver
• 1 – T-10 Torx® Driver
• 2 – Side Flags (Carbon Fiber)
TOOLS REQUIRED
The following is a list of tools required to install the Matte Box Cage and Side Flags Kit to your Matte Box:
• T-6 Torx® Driver (Included)
• T-10 Torx® Driver (Included)