Water instructions, Description of the iron station – Reliable i400 User Manual
Page 10
06
3. Pick up the boiler unit and pour approximately half of the solution out of the
boiler tank. Vigorously shake/swirl the remaining solution around the tank to
loosen and pick up any softened sediment that may have accumulated inside.
Pour the remaining solution out of the tank. You may see bits of sediment and
mineral come out at this point.
4. Rinse the tank with clean water until there is no smell of vinegar or any sedi-
ment bits coming from inside the tank. NOTE: Sediment/mineral pieces can
be blown into the solenoid valve or the steam nozzle during operation so it is
important that they are not left in the tank after cleaning.
5. The unit is now ready for use.
WATER INSTRUCTIONS
Use tap water or 50/50 tap/distilled water in the appliance. Do not use perfume
or products containing alcohol in the appliance.
DESCRIPTION OF THE IRON STATION
1. Safety cap
2. Mono hose
3. Steam iron switch
4. Boiler switch
5. Low water light
6. Temperature regulating knob
7. Steam button
8. Thermostat reset button
9. Steam regulation knob
10. Funnel
11. Wand to support mono hose
12. Water level measuring stick
13. Iron rest
7
6
5
3
12
13
8
4
9
1
2
10
11