Reliable 9000C - Manual (Page 6)

03
IMPoRtANt SAFetY INStRUCtIoNS
ReAd All INStRUCtIoNS beFoRe USe
When using your UberLight, basic safety precautions should always be followed.
Please read the following instructions carefully as they provide important informa-
tion concerning how to install, use and care for this product.
INStAllAtIoN INStRUCtIoNS FoR 9000C
tHe 9000C CAN be USed WItH oUR WItHoUt tHe SUPPlIed ClAMP
If you would like to use it without the clamp, unscrew the 4 screws that attach the
clamp, and place the base where you would like to mount the light. Using 4 longer
screws (not supplied), attach the base to the surface.
To use the 9000C with the provided clamp, unwind the clamp to the desired width,
place over a hard surface and tighten so it is secure.
teCHNICAl dAtA
Voltage: 120V ~ 60Hz
Working Power: 2W - 5W
On/Off switch 2 Position Switch:
I = 2W
II = 5W
lAMP bASe