Reznor B125 Option - Installation - Horizontal/Vertical Vent Outlet, size 125 - Manual

Form I-F/B125-HV, P/N 132794 (Rev 2), Page 1
®
Horizon tal/Vertical
Vent Outlet
INSTALLATION FORM I-F/B125-HV
Obsoletes RGM 434-HV125
Applies to: Models F125 and B125
Model F and B 125 unit heaters require field assembly of the vent outlet. Using 17, #10 x 1/2" sheetmetal
screws (16 in the plastic bag and the two screws used to hold the vent outlet pieces in place during shipping),
carefully follow the illustrated instructions on page 2 to assemble the vent outlet.
DANGER: Failure to provide proper venting could result in death, serious injury, and
/or property damage. The unit must be installed with a vent connection and proper vent
to the outside of the building. Follow the instructions on page 2 and the venting
instructions in the installation manual.
WARNING: Improper installation, adjustment,
alteration, service, or maintenance can cause
property damage, injury or death. Read the
installation, operation, and maintenance
instructions thoroughly before installing or
servicing this equipment.
SEE PAGE 2
! CAUTION: THIS HEA
TER
REQUIRES ASSEMBL
Y
OF FLUE OUTLET
.
REFER TO
INSTRUCTIONS ON
THIS SHEET
.
! CAUTION:
THIS HEA
TER
REQUIRES ASSEMBL
Y
OF FLUE OUTLET
.
REFER TO
INSTRUCTIONS ON
THIS SHEET
.