Reznor R6GN Option - Installation - Horiz. Roof Curb w/Supply Duct (559543) - Manual

INSTALLATION INSTRUCTIONS FOR
559543
HORIZONTAL ROOF CURB WITH DUCT
USED WITH R6GN 150/180 UNITS
INSTALLATION
INSTRUCTIONS
FORM# 123D-0109
U.S. PATENT 5148647
This Roof Curb is NRCA approved and is constructed of 16 gauge galvanized steel with a full perimeter 2" x 4" wood nailer
strip. The curb is designed to be used with the Cooling, Gas Electric, and Heat Pump Models. The curb is shipped with the
following parts, See Figure 2:
Step 2:
Layout the curb pieces before assembly to insure that all the necessary pieces are included.
Step 1:
Curb Package is shown as shipped with easy to identify part numbers on all sides. Cut shipping bands and remove all
parts to verify parts to above list.
(A)
(B)
Fig ure 1
Fig ure 2
(D)
(E)
(F)
(G)
(J)
2 ea. Curb Long Sides - 94 ½" Long (A)
1 ea. Curb Short Sides -77 3
8
" Long (B)
1 ea. Curb Short Side w/ Duct Opening -77 3
8
" Long (C)
2 ea. Condensor Pans - 74 x 18 5
8
" (D)
2 ea. Condensor Pans - 74 x 16 3
8
" (E)
1 ea. Deflectors - 74 x 19 13
16
" (F)
1 ea. Deflectors - 74 x 18 13
16
" (G)
2 ea. Duct Panel - 74 x 27 5
16
" (H)
1 ea. Divider Panel - 74 x 22 ½" (J)
1 ea. Horizontal Braces (K)
1 ea. Hardware Package Includes:
4 ea. "Hinge" Pins 3
16
"
90 ea. Hex Washers screws #10 x ½"
3 ea. Gasket ¾" x 1 ¼" x 14' (42 ft. total)
(A)
(H)
(K)
(H)
(C)
(E)
(D)