32 vehicle care – Cadillac 2010 SRX Crossover User Manual
Page 336
Advertising
9-32
Vehicle Care
To adjust the vertical aim:
1. Open the hood. See Hood on
page 9‑5 for more information.
Base Vehicle
Up-level Vehicle
2. Locate the aim point at
the center inner projector
condensing lens of the low-beam
headlamp (not the outer lens).
3. Measure the distance from the
ground to the aim dot on the
low‐beam headlamp. Record the
distance.
4. At the wall measure from the
ground upward (A) to the
recorded distance from
Step 3 and mark it.
5. Draw or tape a horizontal line (B)
on the wall the width of the
vehicle at the height of the mark
in Step 4.
Advertising