Reznor JT4BD Option - Installation - Snow Stand - Manual

Installation Instructions
Snow Stand Kit
Unit Installation on Snowstand
Assembled Snowstand
INTRODUCTION
This Snowbase Kit contains four (4) Legs, four (4) Side Braces, and one (1) cross Center Brace, all made
out of sheet metal and painted black. The purpose of this kit is to elevate the outdoor condensing heat
pump unit off the ground to allow unrestricted air flow thru the coil. When assembled in accordance with
these installation instructions, the assembly will support the weight of the condensing unit and lock it into
place to restrict movement from side to side.