Ryvyr BR-KARA-24DE User Manual
Indus
CARE AND CLEANING
•
Dust the furniture frequently with a clean, soft, dry, lint-free cloth, as well as polish it on a regular basis. Clean the surface by rubbing
in the direction of the grain. Avoid using silicone cleaners and waxes.
•
Clean up excess water and spills immediately. Use blotting rather than a wiping action. Water left over a long period of time will
cause white spots in the finish. Please note that some chemicals may damage the finish
.
TM
INSTALLATION INSTRUCTIONS
INDUS
BRIDGE
BR-INDUS-DR12DW
09.2014
For customer support please visit www.ryvyr.com or call 866.395.8112 weekdays 8:00 to 5:00 EST or fax 866.395.8113 any time
THANK YOU FOR CHOOSING RYVYR
Please take a few minutes to review this manual before you start installation. If you encounter
any installation problems, please don’t hesitate to contact us. Before you begin, please
observe all local building codes. Unpack the new product and inspect for damage. The
appearance of your vanity may differ from the illustrations in this guide. These instructions
still apply. Please ensure the finished wall is straight and plumb and the floor is flat and
perpendicular to the finished wall.
SUGGESTED TOOLS AND MATERIALS
Phillips Screwdriver
Level
Drill
Tape Measure
Safety Glasses
10'
NOTE: Where possible, try to affix a stud or provide adequate wall support for the size and weight of the bridge. Bridge comes with
pre-attached brackets on the frame and two wall mount rails. Affix the rails to the wall in the desired location by pre-drilling the rails and
then affixing the rails using the proper fastening, based upon wall material.
1
BRIDGE INSTALLATION
2
Finished Wall
PARTS / HARDWARE INCLUDED
115010
4x
200001
4x