Ryvyr GV101XXX - Manual

SUGGESTED TOOLS AND MATERIALS
ABOVE COUNTER INSTALLATION
INSTALLATION INSTRUCTIONS
TEMPERED GLASS
VESSEL SINK
ALL MODELS
09.2014
For customer support please visit www.ryvyr.com or call 866.395.8112 weekdays 8:00 to 5:00 EST or fax 866.395.8113 any time
• Never use a strong / abrasive cleaner. Always test your cleaning solution on an unnoticeable area before applying it to the
entire surface.
• Wipe surfaces clean, immediately after applying cleaner.
• Do not allow the cleaner to sit or soak. Never let cleaners sit on the surface of the lavatory.
• Use a soft, dampened sponge or cloth. Never use an abrasive material such as a brush or scouring pad to clean surfaces.
They will scratch the lavatory surface.
• Always rinse and wipe clean the fixtures to prevent soap buildup.
CARE AND CLEANING
Adjustable Wrench Channel Lock Tape Measure Safety Glasses
10'
STEP 1:
Cut out a 1 3/4” hole on the counter-top for the drain. Please refer to the cutout template.
STEP 2:
Carefully, position the sink in the cutout opening. If you have mounting ring, place the mounting ring on the counter-top before
positioning the sink.
STEP 3:
Use moderate force and hand-tighten the drain kit to the sink to secure it on the counter-top. It may be necessary to cut part of the
tail-piece or part of the horizontal leg in order to make fit to existing plumbing.
mounting ring
CAUTION! Do not over tighten the drain assembly as this may cause the bowl to forcefully crack during installation or at some
time in the future.
YOUR GLASS VESSEL SINK
BEFORE YOU BEGIN
All vessel sinks do not have an overflow and may require a specific type of drain such as a pop-up, twist and turn, or a grid drain
assembly. Please check your local plumbing codes to determine which drain will meet local plumbing code standards for this product.
• Observe all plumbing and building codes..
• Follow these instructions only if it apply to your installation. Vessel sinks allow you to be creative and flexible with your installation.
• Before installation, remove your new glass sink and carefully inspect it for damage. Return the glass sink to its packaging until you
are ready to install it.
• These instructions contain important care and cleaning instructions. Please review these instructions carefully.