Ryvyr ONVE170CBR - Manual

SUGGESTED TOOLS AND MATERIALS
ABOVE COUNTER INSTALLATION
INSTALLATION INSTRUCTIONS
STONE
VESSEL SINK
ALL MODELS
09.2014
For customer support please visit www.ryvyr.com or call 866.395.8112 weekdays 8:00 to 5:00 EST or fax 866.395.8113 any time
To keep your new sink looking new, please follow these simple care insrtuctions:
•
Routine cleaning of the stone sink will reduce the need for heavy cleaning and polishing .
• Use a soft cloth after each use to minimize soap scum.
• Never use strong / abrasive cleaners. For general cleaning, use mild soap and water or natural stone cleaners. Do not use
abrasive detergents or cleaning pads, which can damage the surface of the stone.
• Periodically, re-apply the natural stone sealer as warranted by use. Refer to the instructions on the stone sealer container for
proper application.
CARE AND CLEANING
Adjustable Wrench Channel Lock Tape Measure Safety Glasses
10'
STEP 1:
Carefully position the sink in the cutout opening.
STEP 2:
To secure the sink on the countertop, use a bead of silicon sealer.
Use moderate force and hand-tighten the drain kit to the sink.
STEP 3:
Install the faucet according to the manufacturer’s instructions / manual.
STEP 4:
Our stone sinks are factory sealed with a penetrating sealer. We recommend sealing your stone sink before it is first used with a
natural stone sealer. Refer to the instructions on the stone sealer container for proper application.
**NOTE: Sink style, cutout on top, and vanity may vary from the picture above. Instructional purposes only.
.
YOUR STONE VESSEL SINK
BEFORE YOU BEGIN
All vessel sinks do not have an overflow and may require a specific type of drain such as a pop-up, twist and turn, or a grid drain
assembly. Please check your local plumbing codes to determine which drain will meet local plumbing code standards for this product.
• Observe all plumbing and building codes..
• Follow these instructions only if it apply to your installation. Vessel sinks allow you to be creative and flexible with your installation.
• Before installation, remove your new glass sink and carefully inspect it for damage. Return the glass sink to its packaging until you
are ready to install it.
• These instructions contain important care and cleaning instructions. Please review these instructions carefully.
CAUTION! Risk of product damage.
Do not use plumbers putty or
oil-based sealers with this product .
These products will stain the
surfaces permanently.