Ryvyr S-WARWICK-60DE - Manual (Page 2)

09.2014
For customer support please visit www.ryvyr.com or call 866.395.8112 weekdays 8:00 to 5:00 EST or fax 866.395.8113 any time
6
Finally, place the bottom side of back splash with sealant
onto the countertop and check alignment of backsplash.
Adjust the leg levelers as needed
** NOTE: Sink style, shape, cutout on top, and the vanity may vary from the picture above. Instructional purposes only.
Apply bead of quality sealant evenly
along the top of the vanity
5 4
Apply silicone sealant evenly along
the bottom of backsplash and wall
CARE AND CLEANING
• Our countertops are factory sealed with a penetrating sealer. We recommend sealing your countertop before the first use with a
natural stone sealer. Refer to the instructions on the stone sealer container for proper application.
• Routine cleaning of the countertop will reduce the need for heavy cleaning and polishing.
• Use a soft cloth after each use to minimize soap scum.
• Never use strong / abrasive cleaners. For general cleaning, use mild soap and water or natural stone cleaners. Do not use abrasive
detergents or cleaning pads, which can damage the surface of the stone. Always test your cleaning solution on unnoticeable areas
before applying to the entire surface.
• Never let cleaners sit on the surface of the stone for long periods of time.
• Periodically, re-apply the natural stone sealer as warranted by use. Refer to the instructions on the stone sealer container for
proper application.
INSTALLATION INSTRUCTIONS
STONE VANITY TOP
MODELS WITH AN UNDERMOUNT