Ryvyr M-MANHATTAN-36WT User Manual
Manhattan
CARE AND CLEANING
• To maintain the beauty of the finish, avoid placing the furniture in direct sunlight, as sunlight causes fading. Also avoid changes
in temperature by arranging furniture away from radiators, heat and air vents, and air conditioning units. Avoid placing directly
under windows.
• Clean the mirror using a soft, slightly damp cloth. When cleaning the mirror, spray the mirror with a glass cleaner and wipe clean.
Avoid using silicone cleaners and waxes.
TM
INSTALLATION INSTRUCTIONS
MANHATTAN
MIRROR
M-IMANHATTAN-XXXX
10.2014
For customer support please visit www.ryvyr.com or call 866.395.8112 weekdays 8:00 to 5:00 EST or fax 866.395.8113 any time
THANK YOU FOR CHOOSING RYVYR
Please take a few minutes to review this manual before you start installation. If you encounter
any installation problems, please don’t hesitate to contact us. Before you begin, please
observe all local building codes. Unpack the new product and inspect for damage. The
appearance of your mirror may differ from the illustrations in this guide. These instructions
still apply. Please ensure the finished wall is straight and plumb and the floor is flat and
perpendicular to the finished wall.
SUGGESTED TOOLS AND MATERIALS
Phillips Screwdriver
Level
Drill
Tape Measure
Safety Glasses
10'
NOTE: Where possible, try to affix a stud or provide adequate wall support for the size and weight of the mirror. Mirror comes with
pre-attached brackets on the frame and a wall mount cleat. Affix the cleat to the wall in the desired location by pre-drilling the cleat and
then affixing the cleat using the proper fastening, based upon wall material.
1
MIRROR INSTALLATION
2
Finished Wall
PARTS / HARDWARE INCLUDED
115010
3x
200001
3x