Settings – Cobra Electronics INTELLILINK XRS R9G User Manual

Page 32

Advertising
background image

28 English

Settings

Spectre 1 Audio Mode

Spectre 1 Audio mode is only available if Spectre 1 Alert is on. Alerts are
audio and displayed on screen. Safety Alert radar signals are detected and
alerts given when Safety Alert mode is on. Factory setting is Spectre 1 Audio
Off.

Safety Alert

When Safety Alert mode is On, Safety Alert radar signals are detected and an
alert is given. During alert unit continues to detect other signals. Factory
setting is Safety Alert On.

Low Car Voltage Warning

Many U.S. cars have continuous power to 12V outlet and if a device is
connected/kept on, it will drain vehicle’s battery. To avoid this, XRS R7/R9G
comes with SmartPower and Low Car Voltage Warning features.

The detector emits a car battery low alert when voltage drops below 11.9
volts. The detector enters SmartPower mode to avoid further battery draining.
Factory setting is Car Battery Low On.

The following functions are available only if a Global Positioning System
Locator is connected to the system.

Speed Alert

The Speed Alert with the GPSL module tracks vehicle speed and sounds an
alert when set speed is exceeded. Speed settings increase or decrease in
5 MPH or km/h increments, depending upon Speed Units chosen in User
Settings. Speed Alert must be turned on to see Adjust Speed Setting screen.
Factory setting is Off.

Display GPS Database Date

The GPS database screen is only informational. The screen changes only
when you have updated the database.

Delete all User Locations

Delete all user-programmed location alerts with this screen.

Your Detector

Advertising
This manual is related to the following products: