Clarion DGL373 - Manual (Page 19)

19
DGL373
7. TROUBLESHOOTING
Problem Description Cause
During power off, the
LED blinks whenever
the on/off button is
pressed.
Power on illusion It can be powered up after
the button is pressed once.
However, this sequence may
fail sometimes. If it happens,
release the button and retry
again.
The device does
not start up properly
upon power up.
Power on failure User may execute following
steps to recover the situation.
a) Press the [RESET] switch if
the red LED is on.
b) Try to switch on the Transmitter
again.
iPod control
(AVRCP) does not
work, but music is
streaming. (used
with iPod Cradle).
This could be due to
a loose connection
between Transmitter,
Cradle and iPod.
Make sure the Transmitter and
the iPod are securely connected
to the Cradle.
The AVRCP profile
might not be
connected.
Power off and power on the
Transmitter to auto re-establish
connection.
OM_Dongle DGL373.indd 19 5/30/07 2:19:34 PM