Santec 7089SE - Manual

PAGE 01
MODENA COLLECTION
SUPPLY ELBOW
## PART DESCRIPTION PART #
1 Supply Elbow* SE00-1
* Please specify the finish when ordering the part.
KEEP THIS INSTRUCTION BOOKLET FOR FUTURE REFERENCE
7089SE _ _-_ _
ITEM NUMBER
1
INSTALLATION INSTRUCTIONS
Water inlet
pipe
1. Place SUPPLY ELBOW in the wall hole sized ½”.
2. Screw in the water inlet pipe.
FLUSH BOTH SUPPLY LINES BEFORE INSTALLATION
.
AFTER FLUSHING , SHUT OFF BOTH SUPPLY LINES.
SIZE FOR WATER INLET PIPE IS 1/2”
3. Connect a hose for water outlet.
Hose for Water
outlet