Curtis IP1500UK - Manual (Page 7)

OPERATING INSTRUCTIONS
6
Setting up your radio
Checking AM Radio reception
Your clock radio has a built-in antenna for AM radio. To improve
reception, you need to rotate your unit.
Unpacking And Set Up
•
•
•
•
Placement of the System
The system should be placed on a stable, level surface such as a
table, desk, or shelf, convenient to an AC outlet, away from direct
sunlight, and sources of excess heat, dust, moisture, humidity,
vibration, or strong magnetic fields.
The speakers may be placed next to the main unit or as far apart as
the speaker wires allow. We recommend that you leave a gap of
approximately 1/2 inch between the main unit and the speakers so
that any vibration from the speakers will not interfere with the CD
player in the main unit.
Remove the main unit, the speakers, and the remote control unit
from the display carton. Remove all packing materials from the
components.
Unwind the AC power cord and extend it to its full length.
Unwind the external FM wire antenna and extend it to its full length.
Remove the twist-ties from the speaker wires.