Centro 6800 - Manual (Page 3)

1
HARDWARE PACK
TOOLS NEEDED FOR ASSEMBLY
• #2 Phillips screwdriver (long and short)
• ¼” Slotted screwdriver (long and short)
• Adjustable wrench
• Pliers
• Rubber Mallot
Before assembling the barbecue, read these
instructions carefully.
Assemble the barbecue on a flat, clean surface.
Grill is heavy.
Notes: Do not fully tighten all the nuts during this
initial stage.
No. Description Part Number Quantity
1 1/4"×38mm Screw 20120-13038-250 4
2 1/4"×16mm Screw 20120-13016-250 8
3 1/4"×13mm Screw 20120-13013-250 14
4 ø7 Lock Washer 41400-07000-250 26
5 ø7 Washer 40300-07000-250 26
6 NO.10×10 Screw 20124-10010-250 28
7 ø5 Lock Washer 41400-05000-250 28
8 ø5 Washer 40300-05000-250 28
9 NO.10 Nut 30224-10000-250 4
10 ST4.2×20 Tapping Screw 22500-42018-250 1
11 ST4.2×10 Tapping Screw 22500-42010-137 1
12 NO.8-32UNC x10 Screw 20332-08010-250 4
13 Control Knob G412-4500-9000 1
14 Wrench G401-0071-0182 1
#1. ¼”×38mm Screw (x4)
#4. ø7 Lock Washer (x26)
#7. ø5 Lock Washer (x28)
#11. ST4.2×10 Tapping Screw (x1) #12. NO.8-32UNC x10 Screw (x4)
#14. Wrench (x1) #13. Control Knob (x1)
#10. ST4.2×20 Tapping Screw (x1)
#2. ¼”×16mm Screw (x8)
#5. ø7 Washer (x26)
#8. ø5 Washer (x28)
#3. ¼”×13mm Screw (x14)
#6. NO.10×10 Screw (x28)
#9. NO.10 Nut (x4)
Caution:
Sheet metal can cause injury. Wear gloves when installing the grill.