ScanTool 5100 ECUsim - Manual (Page 5)

ECUsim™ 5100 User Guide 5
1.1 General Features

Support for all legislated OBD-II protocols:
o SAE J1850 PWM
o SAE J1850 VPW
o ISO 9141-2
o ISO 14230-4 (KWP2000)
o ISO 15765-4 (CAN 250/500kbps, 11/29 bit)

Functional and physical addressing

Three PIM slots

Each PIM supports three virtual ECUs: ECM, TCM, and ABS

Five knobs assigned to frequently used PIDs:
o Coolant Temperature
o Engine Speed (RPM)
o Vehicle Speed
o Oxygen Sensor Voltage
o Mass Airflow (MAF)

Fixed SAE J1979 modes and PIDs

“MIL”, “Link” and “Power” indicators

“FAULT” button

USB connection for PIM configuration and OBD traffic monitoring

On-the-fly OBD protocol switching

Standard J1962F connector

Firmware upgradeable
1.2 Package Contents

ECUsim 5100 unit (with 1, 2, or 3 installed PIMs)

110/220 VAC to 12 VDC switching power supply

US style power cable

OBD connector dust cover

USB cable