Connecting dvd player with component ypbpr – Sceptre X322BV-HD User Manual
Page 17
- 17 -
www.SCEPTRE.com
SCEPTRE X320 HDTV User Manual
Connecting DVD Player with Component YPbPr…
1.
Make sure the power of HDTV and your DVD player is turned off.
2.
Obtain a Component Cable. Connect the green color connector to both your DVD player
and YPbPr’s green connector port on the back of your HDTV.
3.
Connect the blue col
or connector to both your DVD player and YPbPr’s blue connector
port on the back of your HDTV.
4.
Connect the red color connector to both your DVD player and YPbPr’s red connector
port on the back of your HDTV.
5.
Obtain a RCA Audio Cable. Connect the white color connector to both your DVD player
and YPbPr’s white connector port on the back of your HDTV.
6.
Connect the red color connector to both your DVD player and YPbPr’s red connector
port on the back of your HDTV.
7.
Turn on the HDTV and your DVD player.
8.
Use the r
emote control’s source button or the source button on the TV to switch to
YPbPr.
Please Note :
Sometimes DVD players will not automatically output to YPbPr. You will
need to configure your DVD player with AV connection first then switch to
YPbPr. Plea
se reference the DVD player’s manual, to make sure the DVD
player is configured to output correctly to the TV.
If you use this connection, you will not be able to use the black colored
S-VIDEO connection with audio because the red and white audio
connections are shared.