Connecting wii™ with composite – Sceptre E246BD-FHD User Manual
Page 18
- 18 -
www.SCEPTRE.com
SCEPTRE E236BD-FHD HDTV User Manual
Connecting Wii™ with Composite…
1.
Make sure the power of HDTV and your Wii™ is turned off.
2.
Obtain a Yellow Video Cable. Connect the Yellow Video connector to both
your Wii™ and AV’s Yellow Video connector port on the back side of your
HDTV.
3.
Obtain a RCA Audio Cable. Connect the white color connector to both your
Wii™ and AV’s white connector port on the back side of your HDTV.
4.
Connect the red color connector to both your Wii™ and AV’s red connector
port on the back side of your HDTV.
5.
Turn on the HDTV and your Wii™.
6.
Use the remote control’s source button or the source button on the TV to
switch to AV.
Please Note :
•
Make sure to read your Wii™ installation guide for further
information.
•
If you are using this current connection then the YPbPr
connection will not have audio because the red and white
audio connection is shared with this port.