Sceptre X505BV-FMDR - Manual (Page 8)

- 8 -
www.SCEPTRE.com
SCEPTRE X505 HDTV User Manual
Attaching or Removing the Stand
1. To attach the stand place the display unit flat on a table. Afterwards attach the
neck piece onto the display and screw in the 4 fine threaded screws to secure the
neck.
2. Attach the plastic ring to the bottom of the stand and the metal plate to cover up
the plastic ring. Make sure to match the 3 holes / metal pin on the metal plate to 3
holes / guard rail on the bottom of the base. Finally screw in the 5 thick threaded
screws to secure the stand.
3. To remove the stand, remove the 4 fine threaded screws indicated in the picture
at Step 1 and the stand will come off.
4. To finalize your installation of the TV, please read the following
A.
If you are placing the TV on a stand, we would recommend you to use a TV
safety strap (not included) in order to minimize the possibility of the TV
toppling over.
B. If you are mounting the TV on the wall

Make sure the wall is structurally safe for the weight of the TV

Make sure the wall mount kit is compatible with the TV

Read and follow all instructions provided by the wall mounting kit.

Securely install all screws and connections