Sceptre X405BV-FMQR - Manual (Page 13)

- 13 -
www.SCEPTRE.com
SCEPTRE X405 HDTV User Manual
Rear View Connections
1. HEADPHONE – This connection is for headphones to be attached to
the TV.
2. SPDIF - This connection port is used for sending out digital audio
signals to digital surround sound receivers. The black (Optical
SPDIF OUT) connector sends out either bit-stream or PCM digital
sound signal to a home theater receiver with digital optical input.
3. Analog Audio Out – This connection is for connecting to analog
audio receivers using red / white RCA jacks.
4. Video – Video connects to devices that use composite video cables
such as VCR or DVD player or Wii™. Connect the yellow for video
and the red / white for audio. This port shares the audio jacks
with YPbPr.
5. YPbPr – This connection port is for DVD players or satellite / cable
set-top boxes that use component cables. From left to right, connect
green, blue, and red for video, and then connect white for left
channel audio, and red for right channel audio. This port shares the
audio jacks with Video.
6. USB – USB connects to USB flash drives for playing music and
picture. The USB port is also used for updating the TV’s firmware.
7. TV – This connection is for analog cable without the cable box or
over-the-airwave antennas. The tuner is a hybrid tuner that tunes to
both analog and digital channels. This connection uses coaxial RF
cable. For over-the airwave digital stations please check
http://www.antennaweb.org . This tuner DOES NOT support QAM.