Sceptre U508CV-UMK User Manual
Page 13
- 13 -
www.SCEPTRE.com
SCEPTRE U50 UHD TV User Manual
refresh rate. HDMI connects to devices that use HDMI cable, such
as Blu-ray or HD DVD player, or HD cable / satellite set-top box.
This connection port receives pure digital audio and high definition
signal through one single cable. HDMI 2 also doubles as the MHL
connection for cell phones. MHL is a protocol where the TV will
display what your cell phone displays. If your cell phone supports
MHL you can purchase a MHL cable from any electronic store and
connect it to HDMI 2 and also your cell phone. Make sure the TV’s
source is changed to HDMI 2 and turn on your cell phone. You
should see an image of your cell phone screen. HDMI 2 also
supports ROKU™ streaming stick. Plug the ROKU stick to HDMI 2,
and switch your source to HDMI 2. Afterwards use the purple
colored buttons to access ROKU functions. This HDMI also supports
CEC (consumer electronics control) functions (no audio return
channel).
6.
Line Out (3.5mm mini-jack)
– This connection is for connecting to
analog audio receivers. You can either use the 3.5mm mini-jack for
connection or you can use the included 3.5mm mini-jack to female
RCA conversion cable to connect to your analog audio receiver.
7.
TV
– This connection is for digital or analog cable without the cable
box or over-the-airwave antennas. The tuner is a hybrid tuner that
tunes to both analog and digital channels. This connection uses
coaxial RF cable. For over-the airwave digital stations please check
8.
SPDIF - This connection port is used for sending out digital audio
signals to digital surround sound receivers. The black (optical SPDIF
OUT) connector sends out either bit-stream or PCM digital sound
signal to a home theater receiver with digital optical input.
9.
HDMI 1 (ver. 2.0)
– HDMI 1 houses a HDMI version 2.0 connection.
Under ultra HD 4K x 2K resolution this connection supports 60 Hz
refresh rate and HDCP 2.2. This HDMI also supports CEC
(consumer electronics control) functions. HDMI connects to devices
that use HDMI cable, such as Blu-ray or HD DVD player, or HD cable
/ satellite set-top box. This connection port receives pure digital
audio and high definition signal through one single cable. This port
also can accept a HDCP video device for video such as PC.
10.
HEADPHONE
– This connection is for headphones to be attached to
the TV.
11.
USB
– USB connects to USB flash drives for playing music and
picture. The USB port is also used for updating the TV’s firmware.
Please Note:
This TV features a power saving function which will turn off the
TV automatically after 10 minutes of idling on a connection with
no signal. This feature is present on all connection.