Sceptre SS1000 - Manual (Page 10)

- 10 -
www.SCEPTRE.com
SCEPTRE POWER BOOST User Manual
Operation
Powering on the Sceptre Power Boost
To reduce the device self-discharging, the main power switch is set at
“Off”
mode (O symbol is depressed). After turning on the main power switch, the
system will start to detect the power level automatically and begin to supply
power to the sockets. If the main power switch is left on, the power level of
the unit will drop faster than switched off.
Flashlight
To use the flashlight, flip the main power switch to the on position. Press the
power level indicator button then press the flashlight button to turn on the
flashlight.

Lighting Modes

100% output

50% output

10% output

Quickly blinking mode

Slowly blinking mode

SOS mode
Power Level Indicator
To check the power level of the unit, flip the main power switch to the on
position. Press the power level indicator button.

Green light flashing: The unit is being overcharged, please unplug
the DC plug.

Yellow light flashing: You are not using the provided ac adapter for
the Sceptre Power Boost. The current going to the unit is too high.

Green, yellow, red light all on: The unit is at full capacity.

Red, and yellow light is on: The unit is at mid capacity

Red light is on: The unit is at low capacity, please recharge the unit.

Red light flashing: The unit is at critically low capacity, please
recharge the unit immediately.

All lights are off or no response: The unit has no detectable power,
please recharge immediately.
Please Note:

Make sure to flip the main power switch to the off position when you
are not using the unit in order to save power.

To maintain the condition of the unit we recommend recharging the
unit every 3 months.

You will need to press the power level indicator button in order to use
the flashlight or to charge devices on the USB ports.