Sceptre X226W-1920 - Manual (Page 17)

SCEPTRE X226 Page17
CONTRAST / BRIGHTNESS
This function adjusts the brightness and contrast of the LCD.
1. To use this function, press [1] to open the OSD then highlight CONTRAST / BRIGHTNESS
function by pressing the ▲ or ▼ button.
2. Press [2] to enter the function.
3. Press ▲ or ▼ button to select BRIGHTNESS or CONTRAST to adjust.
4. Press [2] to select the option you want to adjust.
5. Use the ▲ or ▼ button to adjust the values.
Please Note :
•
BRIGHTNESS adjusts the black level in a picture. If the value is adjusted too high,
the picture will look washed out. If too low, the picture will not have much detail in
dark colors.
•
CONTRAST adjusts the white levels in a picture. If the value is adjusted too high,
the picture will not have any details in bright parts of the picture. If set too low,
the picture will looked washed out.
• DCR is a function that automatically adjusts the contrast for you depending
on the graphics displayed at the time.
• ECO Mode is a function that conserves power for the monitor.