Sceptre E275W-1920 - Manual (Page 29)

Page28 SCEPTRE E27
How do I clean the LED Monitor?
IMPORTANT
1. The power cable has to be removed from the socket before cleaning
the LED Monitor.
2. Do not use volatile solvent (alcohol, rosin, and toluene) to clean the
LED Monitor. These types of chemicals might damage the housing
and the LCD glass.
Cleaning the bezel
1. Use a 100% cotton cloth or micro-fiber cloth for cleaning.
2. If the bezel is dirty to the point where you cannot simply dry wipe it,
please lightly dampen the wiping material with clean water and wipe
again. Wipe the display with a dry micro-fiber cloth or 100% cotton
cloth afterwards.
Please Note :
 Make sure you wring the water out of the cloth before
cleaning the bezel in order to prevent water from
penetrating into the electronics.
Cleaning the Screen
1. Use a 100% cotton cloth or micro-fiber cloth for cleaning.
2. The LCD screen glass is extremely fragile. Do not scrape it with any
material. Do not press or tap the screen to avoid cracking. When
the screen is dirty to the point where you cannot simply dry wipe it,
please lightly dampen the wiping material with clean water and wipe
again. Wipe the display with a dry micro-fiber cloth or 100% cotton
cloth afterwards.