Connection suggestions – Sceptre SB301523 User Manual
Page 13
Advertising
- 12 -
Sound Bar 2.1 User Manual
Connection Suggestions
If you have digital audio with your TV
1. Grab the included 3 head RCA audio cable and use the black colored RCA plug.
2. Find the SPDIF digital audio coax connection on the back of the TV and connect
one end of the cable to it.
3. Connect the other end of the cable to the back of the Sound Bar 2.1’s orange coax
connection.
4. Turn on the TV, make sure you output PCM signal to the Sound Bar 2.1.
5. Turn on the Sound Bar 2.1 and press the COAX button on the Sound Bar 2.1’s
remote.
6. Enjoy your Sound Bar 2.1!
Please note:
For digital audio, the sound bar only decodes PCM signals. If the sound has
static or the Sound Bar is silent that means the signal is not PCM.
Advertising