SeaLand 960 Series Mounting Bracket User Manual
Hold-down brackets installation instructions
Advertising
Hold-Down Brackets
Installation Instructions
1. Set SaniPottie portable toilet in desired
location, providing clearance for lid and
seat in "up" position, and clearance at the
sides to unlatch and remove top tank.
2. With side clasps unlatched, place
hold-down brackets (with mounting holes
facing out) under the tank and align with
grooves (see illustration).
3. With pencil or awl, mark bracket mounting
holes.
4. Remove toilet. Fasten brackets to floor or
deck with screws provided.
5. Set SaniPottie between brackets and latch
in place.
600344398
Dometic Corporation
13128 State Rt 226
PO Box 38
Big Prairie, OH 44611
1-800-321-9886
© Dometic Corporation
Advertising