SeaLand TankSaver Relief Valve - Manual

T
ankSaver
®
Holding Tank Relief Valve Instructions
Sealing
ring
Holding
tank T
ankSaver
valve
600344478
Dometic Corporation 13128 State Rt 226 PO Box 38 Big Prairie, OH 44611 1-800-321-9886
© Dometic Corporation
Install on top surface of holding tank wher
e accessible
and the fr
ee flow of air into the valve is not r
estricted.
1.
Drill a 3-inch (76mm) hole in a flat spot on top of holding tank with a 3-inch hole saw
.
2.
Insert rubber sealing ring into 3-inch hole.
3.
Lubricate the inside surface of the sealing ring and the outside surface of the T
ankSaver valve with liquid
dishwashing deter
gent.
4.
Insert the T
ankSaver valve into the sealing ring.